Paint for walls and ceilings water-dispersion Dulux Vinyl Extra Matt matte base-BW 9 l

Details

Appointment:
Designed for indoor use, for painting walls and ceilings in rooms with moderate humidity and moderate operational load, such as bedrooms and living rooms.
It is not recommended to use it in offices, corridors, public spaces with a high flow of people.

Scope of application:
Apply to completely dried and smooth mineral surfaces (concrete, plaster, brick), drywall, wallpaper for painting. The declared properties of the paint depend on the selected type of wallpaper.
It is certified for use in children's and medical institutions.

Properties:
extra smooth coating;
elasticity;
concealability and environmental friendliness;
hypoallergenic;
high adhesion;
masks small surface defects.
Surface preparation and application of the product:
The base for painting must be clean of dirt and dust. Defects are sealed with putty and also sanded.
Mix thoroughly before use. To strengthen the base surface, increase adhesion and reduce paint consumption, prime the prepared surface with Dulux primer. It is recommended to apply the paint in 2 layers at air and surface temperatures from +5oC to +30oC and air humidity from 40 to 80%.
It is optimal to paint the base in 2 layers to achieve the deepest possible color. The temperature in the room can range from +5oC to +30oC. It is also desirable that the humidity does not exceed 80% and is not below 40%.
Dilution, if necessary, no more than 1 part of water to 10 parts of paint.
Conventional spraying: dilute in a ratio of no more than 1 part of water to 5 parts of paint — suitable for most equipment. Airless spraying: dilution with water is not required. If necessary, add up to 10% water. The recommended operating pressure is from 100 to 150 bar, the spray angle of the torch is 30-50°, the nozzle diameter is 0.012-0.017 inches. Additionally, read the recommendations on the website of the manufacturer of painting equipment.
For application, you can use a synthetic brush, roller, sprayer. The composition is well applied, evenly filling the pores of the base. One layer dries for 2 hours. Complete drying — after 4 hours.
Care of the painted surface. Avoid washing and intensive cleaning of freshly painted surfaces. A month after painting, it can be wiped with a dry soft brush or dust cloth. Heavy dirt can be removed with a damp, soft, lint-free cloth soaked in soap or shampoo solution. There may be a slight change in the gloss of the coating. Do not leave the surface wet.

Transportation and storage conditions:
4 years at a temperature from +5oC to +30oC in unopened original packaging.